However, do not spray water or cleaning solution directly onto the rollers.
Installation Location At least 4 in. While squeezing the OPEN release, open the front unit towards you.
The ideas inside this book will lead you to a better place. Images are not scanned Check the following if the scanner does not scan an image even though the scanning operation is being performed: Dkwnload yourself with the parts before connecting the scanner. Cleaning the Scanning Glass and Transport Rollers Turn the power off and unplug the power cord from the power outlet. Check the position of the feed selection lever and set it according to the type of document being loaded.
Avoid unstable surfaces and locations subject to vibration.
You can see dates of previous stops on the list at the right or the map at the bottom. Resetting The Counter The displayed dialog box differs depending on Windows you are using.
After you have read this manual, retain it for future reference. Close the paper feed tray. The scanner does not turn on Loading a Document for Scanning Notice When loading a document for scanning, be careful to remove all paper clips, staples, etc. Be sure to wipe both clean. The recommended USB 2. Before Using the Unit Page 71 Documents are not ejected properly When you set and scan a multi-page document, individual dodnload of the document are not fully ejected from the eject rollers.
Reinstalling The Retard Roller Reinstalling the Retard Roller Insert pxf retard roller into the groove inside starhup roller cover, and align the notch in the roller with the spindle on the front unit. Scanning a curled document or a creased document can damage the document.
Free PDF Converter
All you need is a product or service that springs from what you love to do anyway, people willing to pay, and a way to get paid. Is the scanner correctly connected to the Donload If necessary, close the paper feed tray. Turn off the PC. Page 17 Rear and left views Ventilation openings Stand Pull this out to prevent the unit from toppling.
Also note that because the power is on during this operation, there is a risk of electrical shock if the scanner or your hands are wet. Notice If you are using Windows Doanload 4. Rear and left views Ventilation openings Stand Pull this out to prevent the unit from toppling.
Canon DR-2080C Startup Startup Manual
Making a career out of your passion sounds like a dream, but in this straight-forward, engaging book he shows you how to get it done, one simple step at a time. Stqrtup trailing edge sticks partway inside the scanner.
Installation Procedure The procedure for installing the unit is outlined below. On the Start menu, point to Settings and click Control Panel.
Free PDF Printer – Print to PDF with doPDF
The power switch is located on the lower right rear corner of the scanner. Dowjload Orient the document with the back side facing forward and top edge pointing down, and then load it into the document feed opening.
It is possible to cut your hand on the edge of a sheet downpoad paper. Do not place flammable chemicals, such as alcohol or paint thinner, near the unit. Wipe the scanning glass the shaded portion dry cloth.
Page 20 Slide the roller lock lever to the right, and set it into the hollow to the left of the roller. On the Start menu, Click Run.